A few words on merging...

The Merge...

It's something we all must do at some point - possibly daily. The merge... onto the interstate... or potentially the merge off the interstate... Before we moved into our new home, I merged every day getting onto the interstate after work... For the most part, people understand that when you enter 64E from Northampton, you take turns with the other lane... unfortunately, there are others that haven't quite achieved the concept...

Additionally, the people entering 64E at Indian River seem to have no.idea.what.so.ever how to successfully complete The Merge... it is absolutely amazing to me that traffic actually comes to a stop at this on/off ramp.

Now, it's been quite some time since I took my driving test and/or read that little driving booklet the DMV provides before the test, so I'm not sure if this is a topic that is covered. I decided I'd take a gander and try to find some basic instructions for the curious reader [driver]...

I think this website does a pretty good job: http://www.dmv.org/how-to-guides/merging-into-traffic.php

Merging is a relatively straightforward driving skill to learn, but that does not change the fact that the act instills fear in some motorists. This can be chalked up to the high speeds generally involved, and the fact that the task needs to be accomplished quickly, with little room for error. But after a few rounds of practice, your behind-the-wheel confidence will be enhanced and the technique of merging will become somewhat natural.

Still, the procedure requires extreme awareness because the last thing you want to do is have the driver in the vehicle that you are merging in front of end up in your passenger seat. Nor do you want to go into a panic and wander off from the acceleration pedal and land onto the shoulder. Here are some tips to help you become a major league merger.

The Art of Entering Gaps
Merging is designed to permit vehicles to enter and exit a highway without causing disruption in the flow of traffic. Highways are equipped with on-ramps and off-ramps, which generally connect to acceleration and deceleration lanes.

The idea behind this is when you pull onto the entrance ramp, you slowly begin building velocity. At the point where you can make eye contact with the highway, you need to immediately start assessing the gaps and the speed of existing traffic. From here, you should turn on your signal to reflect your intent to other drivers to merge onto the roadway.

Then use the acceleration lane to match the speed flow, and ease your vehicle into an appropriate gap before the acceleration lane ends. Some highways give you slabs of asphalt that are long enough for a jet to take off; others, especially on the East Coast, are so short you will need to make quick decisions or yield.

A successful merge entails you entering the highway almost at or at the speed limit, while causing no disturbance in the speeds of the vehicles behind you.

Tips for Keeping the Flow
Where the entrance ramp ends and the acceleration lane begins, note the continuation of the solid white (or yellow line). Do not cross this line and head out onto the highway. It serves as the transition from the on-ramp to the lane, and crossing it can cause other drivers to miscalculate your speed and possibly collide with your vehicle. This line serves as a good indicator to begin your acceleration and gap-finding quest.

While your driver-side mirror is essential to observing traffic behind you prior to merging, you will also want to actually turn your head and check your blind spot before easing onto the road.

You should always decide on the space you will shoot for before accelerating rather than getting to full speed and then deciding. Why? Well, you only have so many yards in the lane, and if you are at full speed before you know where you are headed, you might run out of room prior to finding a traffic gap. This will cause you to have to stop, cut another driver off, or wind up on the shoulder―definitely not good merging techniques. [amazing concepts here]

If you are not familiar with the on-ramp or highway section you are entering, use extra caution because you may run into all sorts of interesting obstacles including: "no merge lane" signs, which mean you will need to yield, which may require you stop before moving into traffic; and signal lights that stagger vehicles up the entrance ramp, usually during times of high traffic.
During rush hour, when the entire traffic system slogs along at a turtle's gait, the fine art of merging takes on new importance to keep the surge moving. Many times you will be driving along the highway at a good clip, and the next thing you know you are in a mass of bumper-to-bumper madness.

It lasts for a few minutes, opens up, and then clogs again at the next exit. Sometimes this is simply due to the sheer number of vehicles trying to enter or leave the road on a single stretch of asphalt utilized both as a deceleration and acceleration lane. But, you can also bet there is some improper merging going on, causing the entire system to break down into the proverbial bottleneck.[sound familiar, Hampton Roads?!?!]

To keep a good pace in heavy traffic, merging should work like the teeth on a zipper. One vehicle merges; a vehicle already on the highway passes; another vehicle merges; a vehicle already on the highway passes, and so on. Of course, in this day and age of aggressive driving, it may not always work out this way.

The Exiting Factor
When you choose to exit the highway, you may not technically be merging (or being absorbed into traffic); rather, you are leaving the collective, but it still requires a few words.
In cases where there is only a deceleration lane and an exit ramp, you simply need to signal your intentions to other drivers and pull over. You will use the lane to slow your vehicle and continue on to other roads.

However, when the acceleration lane and the deceleration share the same portion of road surface, it can be tricky. Basically, if the vehicle entering the highway is at top acceleration, you will want to pull into the deceleration lane behind it. If you are moving at a greater clip than the vehicle just entering the acceleration lane then you will want to exit in front of the vehicle. Again, theoretically, this will keep the flow of traffic moving smoothly.

I haven't had a chance to watch this video, but I suspect it could be helpful as well... http://www.youtube.com/watch?v=v-OmDGydsHc

Perhaps I should suggest to the local news channels they should do a news piece on the Art of Completeing a Successful Merge?